Analoge I/O1 DA, 0-10V, 0-20mA, 4-20mA
Digitale I/OModbus TCP til 5 DI & 3 DO Rele kontakt
5 Input & 3 output(Relay: RL1/Form A, RL2/3 Form C) Isolated channels with ModbusTCP module
- Digitale I/O
Modbus TCP to 8 DI & 8 DO Module
The EX9055-MTCP is a high-density digital I/O module designed with a 10/100 based-T interface for seamless Ethernet connectivity. It provides 8 digital input channels, and 8 digital output channels. All of the digital input channels support the input latch function for important signal handling. The digital output channels support source type output.
- Digitale I/O
Modbus TCP til 12 DI & 4 DO (NPN) kanaler
Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP
Ethernet 10/100 Based-T Communication
Support 4 Isolated digital output channels(NPN).
Provide Pulsed/delay Output Mode
Support 12 Isolated digital Input Channels
Provide Counter/Frequency Inputs Mode
Support Dry/ Wet Contact Inputs
Fully Photo-Isolation 3750Vrms - Digitale I/O
Modbus TCP to 12 DI, 2 DO & 2 counter/ freq. (4.5 KHz)
The EX9051-MTCP is a high-density I/O module built-in a 10/100 based-T interface for seamless Ethernet connectivity. It provides 12 digital input, 2 digital output, and 2 counter/ freq. (4.5 KHz) channels with 3000VDC Isolating protection. All of the Digital Input channels support input latch function for important signal handling. Mean while, these DI channels allow to be used as 1 KHz counter. Opposite to the intelligent DI functions, the Digital Output channels also support pulse output function.
- Digitale I/O
Modbus TCP to 12 DI & 6 DO Module
Support Ethernet 10/100 Based-T communication
Support protocol Modbus/TCP,TCP/IP,UDP,ICMP,ARP
Support 12*DI (Direct/Counter/Freq/Latch)
Support Counter(Filter/Signal Width-H/L)/Frequency(Value Select)/Latch(H/L) inputs
Support Dry contact Digital input type
Support 6*DO digital output(open collector)channels
1KHz Pulsed(Freq/Width-H/L/Counts)/Delay(H-L/L-H Width) output
Support Isolated input and output channels - Mix I/O
Modbus TCP to 8-channel T/C Input with 2/DO Module
The EX9019-MTCP is a 16-bit, 8-channel Thermocouple input module that provides programmable input ranges on
all channels. It accepts Various Thermocouple inputs (Type J, K, T, E, R, S, B) and provides data to the host
computer in engineering units (°C). In order to satisfy various temperature requirements in one module, each
analog channel is allowed to configure an individual range for several applications. - Mix I/O
Modbus TCP to 8AI Voltage/ Current input w/ 2DO
Support Ethernet 10/100 Based-T communication
Support protocol Modbus/TCP,TCP/IP,UDP,ICMP,ARP
Support individual channel type setting for ±V, ±mV, mA(4~20)/(0~20)
Support Linear Mapping
Support Analog Input Alarm Setting & High/Low Alarm Digital Output
Support isolated input channels
Support two digital outputs(open collector)
16-bit resolution
2 Channels digital output
0.1% accuracy - Analoge I/O
Modbus TCP to 7-channel RTD Input Module
Support Ethernet 10/100 Based-T communication
Support protocol Modbus/TCP,TCP/IP,UDP,ICMP,ARP
Support individual channel type setting for PT100, PT1000, Balco 500&Ni
Support isolated input channelSupport 16-bit resolution
Support Accuracy:±0.05% or better 
Mix I/O24 dig. inn, 8 dig. ut, 8 an. inn, 2 an. ut
EtherTRAK-2 mix-modul, 24 stk dig. inn, 8 stk dig. ut, 8 an. inn, 2 an. ut
- Mix I/O
24 dig. inn, 8 dig. ut, 8 an. inn
EtherTRAK-2 mix-modul, 24 stk dig. inn, 8 stk dig. ut, 8 an. inn
- Mix I/O
20 dig. inn, 8 dig. ut, 8 an. inn, 4 an. ut
EtherTRAK-2 mix-modul, 20 stk dig. inn, 8 stk dig. ut, 8 an. inn, 4 an.ut
- Digitale I/O
16 isolerte dig. reléutganger, 1 A
EtherTRAK-2 digital utgangsmodul, 16 stk relé 10-30 VDC/V
- Digitale I/O
16 isolerte dig. inn, 120 VAC
EtherTRAK-2 digital inngangsmodul, 16 stk isolerte 120 VAC
- Digitale I/O
16 isolerte dig. inn. 10-30 VDC/VAC
EtherTRAK-2 digital inngangsmodul, 16 stk isolerte 10-30 VDC/VAC
- Analoge I/O
16 an. inn, 8 an. ut, 4-20 mA
EtherTRAK-2 analog kombinasjonsmodul, 16 stk 4-20 mA inn, 8 stk 4-20 mA ut
Handlekurv